E5 series cartridges are composed of advanced polypropylene membrane and supporting layer, with high flux, high precision and low pressure drop, it is an economical choice for pre-filtration.
Applications
? Buffer prefiltration
? Pre-filtration of sterile raw materials
? Pre-filtration of water for pharmaceutical use
? Blood product prefiltration
Product features
? No fiber shedding
? Gradient pore size with extremely high dirt holding capacity
? No foreign substances such as adhesives
? Features broad chemical resistance
Flow curves
Material of Construction | |
Membrane material | Polypropylene |
Center rod/housing/end cap | Polypropylene |
Supporting layer | Polypropylene |
Sealing ring | Refer to ordering information |
Surface area | 0.4 m2/10 inch |
Working condition | |
Max. working temperature | 80℃( 0.173 MPa) |
Max. working pressure difference | 0.50 MPa (25℃) |
0.25 MPa (80℃) | |
Autoclave | 121℃ (30 min, 5 times) |
Biosafety | |
Endotoxin | <0.25EU/ml |
Biosafety | Meets USP<87> and USP<88> biosafety requirements |
Product number key of high precision polypropylene disc filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Inlet/Outlet | Sterilization |
DS=Disc filter | E5=Polypropylene | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 003=3.0 005=5.0 010=10 020=20 030=30 | F=Pharmaceutical grade | 02=2 | 2H=1/4" HB | G=Gamma irradiated F=Not gamma irradiated None=Intolerance to gamma irradiation |
Product number key of high precision polypropylene CA series capsule filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet | Sealing ring material | Sterilization |
CA=Diameter 110 capsule filter | E5=Polypropylene | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 003=3.0 005=5.0 010=10 020=20 030=30 | F=Pharmaceutical grade | 05=5 10=10 20=20 30=30 | L=Up-in & down-out | H=1"-1.5" TC | H=1"-1.5" TC F=1/2" HB | S=Silicone E=EPDM V=Fluorelastomer | G=Gamma irradiated F= Not gamma irradiated None=Intolerance to gamma irradiation |
Technical parameter of high precision polypropylene CA series capsule filter
Material | Series | Size code | Single/dual layer | Surface area (㎡)≥ | Pure water flow 0.2 μm ΔP=0.01 MPa |
Polypropylene | CA capsule filter | F05 | Single layer | 0.2 | ≥5 L/min |
F10 | Single layer | 0.4 | ≥10 L/min | ||
F20 | Single layer | 0.8 | ≥20 L/min | ||
F30 | Single layer | 1.2 | ≥30 L/min |
Product number key of high precision polypropylene CB series capsule filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet | Sterilization |
CB=Diameter 70 capsule filter | E5=Polypropylene | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 003=3.0 005=5.0 010=10 020=20 030=30 | F= Pharmaceutical grade | 01=1 1H=1.5 02=2.5 05=5 | L=Up-in & down-out | D=1/4" HB E=3/8" HB F=1/2" HB G=1/2" TC H=1-1.5" TC | D=1/4" HB E=3/8" HB F=1/2" HB G=1/2" TC H=1-1.5" TC | G=Gamma irradiated F= Not gamma irradiated None=Intolerance to gamma irradiation |
Technical parameter of high precision polypropylene CB series capsule filter
Material | Series | Size code | Single/dual layer | Surface area (㎡)≥ | Pure water flow 0.2 μm ΔP=0.01 MPa |
Polypropylene | CB capsule filter | FH1 | Single layer | 0.01 | ≥0.25 L/min |
F01 | Single layer | 0.02 | ≥0.5 L/min | ||
F1H | Single layer | 0.04 | ≥1 L/min | ||
F02 | Single layer | 0.08 | ≥2 L/min | ||
F05 | Single layer | 0.15 | ≥3.75 L/min |
Product number key of high precision polypropylene cartridge
Membrane material | Pore size (μm) | Type | Length (inch) | Connection type | Sealing type | Sealing ring material |
E5=Polypropylene | 091=0.1 092=0.2 094=0.45 096=0.65 098=0.85 001=1.0 003=3.0 005=5.0 010=10 020=20 030=30 | F=Pharmaceutical grade | 05=5 10=10 20=20 30=30 | B=226 steel liner E=222 steel liner | P=Flat cap R="8" shape tail K=220 | S=Silicone E=EPDM |
Technical parameter of high precision polypropylene cartridge
Material | Series | Size code | Single/dual layer | Surface area (㎡)≥ | Pure water flow 0.2 μm ΔP=0.01 MPa |
Polypropylene | Cartridge | F05 | Single layer | 0.2 | ≥5 L/min |
F10 | Single layer | 0.4 | ≥10 L/min | ||
F20 | Single layer | 0.8 | ≥20 L/min | ||
F30 | Single layer | 1.2 | ≥30 L/min | ||
F40 | Single layer | 1.6 | ≥40 L/min |
Relevant Documents
Copyright ? Shanghai Duoning Biotechnology Co., Ltd. All Rights Reserved Sitemap | Technical Support:
Message-